HydroWing is designed to be a cost-effective and scalable solution to tidal stream energy generation and was the largest tidal stream project in Wales to be successful in the UK government’s latest Contracts for Difference round, having been awarded a 10MW project at the Morlais tidal energy site in Anglesey.
Commercialisation of the tidal energy sector has so far been held back by high operations and maintenance costs. HydroWing’s next generation technology addresses that challenge head on. Its HydroWing technology offers a modular, reliable solution, based on its unique patented design. The wing system streamlines operations and maintenance by allowing for removal of sets of tidal energy turbines without the need to remove or work on the foundations. The new Quad Hull Barge is the latest innovation to the HydroWing system, which further increases productivity and drives down costs.
Richard Parkinson, MD of Inyanga Marine Energy Group, which is the parent company for HydroWing, said: “ Deployment, recovery, and operations and maintenance are large factors in determining the levelized cost of electricity. However, offshore construction vessel availability is very weak with expensive day rates. This means that the cost of planned and unplanned offshore operations is very high. HydroWing’s new Quad Hull Barge has been specifically designed to tackle this issue, driving down costs and ensuring the turbines can be effectively maintained at low cost and with reduced downtime.
“By using four hulls connected by crossbeams and arch support beams, the limit to load width is dramatically increased. Where commercial vessels would typically need to place the load onto the deck with little to no overhang of the load, the Quad Hull Barge locks the load after lifting to the arch. This reduces offshore handling and makes the operation much safer. It means that the width of the load can be independent of the vessel width.
“Our new Quad Hull Barge represents a major leap forward for the sector. The design ticks all the important boxes for offshore operators. It is modular, so it can be transported by road and assembled at site. As it is modular, it can also easily be scaled up for larger turbines. The four pontoons are 25 tonnes each and can be transported by road, which reduces manufacturing costs. It is low drag and easier to tow and can therefore be handled by small, locally available tugs. All of these factors will help to lower the cost of each intervention. In addition, it is on permanent standby and can be deployed quickly, which will help operators to reduce production downtime.
“The Quad Hull Barge will mean that our HydroWing tidal energy arrays can be serviced by existing port infrastructure, rather than requiring major new investment, which is one of the keys to ensuring that the sector achieves profitable growth into the future. We believe our HydroWing technology will unlock the commercial potential of tidal energy worldwide.”
The company has filed a patent application to protect its unique Quad Hull Barge design.
ENDS For more information, contact [email protected]
Notes for Editors
About Inyanga Marine Energy Group
Inyanga Marine Energy Group is an innovative company which is developing cutting edge solutions for the global offshore renewables industry. Inyanga Marine Energy Group operate a highly experienced and specialised team of offshore engineers from their head office in Falmouth, UK. The company also has offices in Rennes, France and Anglesey, Wales.
Inyanga Marine Energy Group has two divisions – HydroWing, which focuses on tidal energy technology development, and Inyanga Maritime, which delivers offshore engineering and installation.The company aims to advance through to deployment the innovative tidal energy converter, the HydroWing, to provide cost-effective, reliable and predictable power to communities around the globe.
HydroWing was the largest tidal stream project in Wales to be successful in the UK government’s latest Contracts for Difference round. The 10MW project will be located at the Morlais tidal energy site in Anglesey, which is managed by the social enterprise Menter Môn. The Morlais site is the UK’s largest consented tidal energy scheme. This ground-breaking project will launch HydroWing’s innovative tidal stream technology at utility scale. Commercialisation of the tidal energy sector has so far been held back by high operations and maintenance costs. HydroWing’s next generation technology meets that challenge head on. For more information, visit https://inyangamarine.com/
About HydroWing
HydroWing is designed to be a cost-effective and scalable solution to tidal stream energy generation. A supporting structure sits on the seabed, under its own weight. The ‘wings’ which hold the turbines are then lowered into position on this structure. This makes HydroWing very straightforward to deploy. The turbines are bi-directional, so they generate power as the tide comes in and as it goes out. These turbines are also cost-effective to produce at scale.
The HydroWing technology to be used for the Morlais project will incorporate the next generation Tocardo T-3 turbines. The company has been working on the development of a Passive Pitch Mechanism which integrates with the Tocardo Bi-Blade system allowing the blade dimensions to be increased, while shedding pitch at higher loads. This is similar to an active pitching mechanism but without compromising the reliability for which the Tocardo Turbines are well known. This increases the yield by 50-60% and makes projects in lower flow locations more feasible and investible.
Tidal energy is a crucial part of the mix to help achieve net zero targets. HydroWing believe that the Morlais project will be a stepping stone towards lowering the costs for tidal energy and that their innovative HydroWing technology will help unlock the commercial viability of tidal energy around the world. For more information, visit: https://hydrowing.tech/
